Air Freshener Blank Iron-On Transfers!

~Air Freshener Blank Iron-On Transfers~

 

Our popular Air Freshener Blanks are extremely popular year-round. 

These blanks are able to be scented in any fragrance you desire, while sporting your company's logo or a catchy phrase while hanging in your vehicle, home or office!

Materials needed:

-Iron-On T-shirt transfer paper (such as AVERY Ink Jet T-shirt Transfers)

-Air Freshener Blanks

-Clothing Iron

 -Elastic Cord

Step 1: Using the Word document program, create your text, photo, or graphic transfer design that you wish to use on your Air Freshener Blanks. 

*IMPORTANT! When you're happy with your transfer design, flip the image, using your software program or your printer. If you do not flip the image, the text will appear backwards when you iron the image on the Air Freshener Blank. If you need an image flipped, you can flip the image for free at www.flipapicture.com within seconds. 

               

                          ^BEFORE^  (incorrect)                           ^AFTER^ (correct)

               

Step 2: Make sure you print a test page on regular printer paper before printing onto the transfer paper. Printing a test page will allow you to judge whether your transfer design is the right size for the Air Freshener Blank that you plan to apply the transfer to, as well as to make sure that the image is correctly flipped so all text is correct. Holding the Air Freshener Blank over the transfer design, or holding up both the transfer design and the blank to a light or window will also work well.

*NOTE - The brighter the picture, the more clear the picture will transfer. Darker colors such as brown and blacks will tend to blend together rather than stand out.



Step 3: While working on a hard smooth surface that can withstand high heat, place a sheet of thin material, such as a pillow case between the hard surface and the Air Freshener Blank that you will be using with the transfer design.



Step 4: The Air Freshener Blanks are made from an absorbent compressed paper material. The ink that is applied to the transfer paper from your printer, will essentially be melted by the heat of the iron, into the surface material of the Air Freshener Blank.

Primitive Star Blank

Step 5: Using an Air Freshener Blank that has been scented and allowed to COMPLETELY dry for a few days, place the transfer design ink-side down, onto the Air Freshener Blank evenly along all edges. Using the iron, firmly press down onto the transfer and Air Freshener Blank for 2-3 seconds. Actually saying "One Mississippi, Two Mississippi, Three Mississippi" is the appropriate time frame at which the iron should be directly pressed onto the transfer without releasing. Holding the iron onto the Transfer and Air Freshener Blank longer than this should not be necessary.

*NOTE: Applying fragrance oil to an Air Freshener Blank that has already had a transfer applied to it, may cause the ink of the transferred image to smear, run or quickly fade.

Step 6: Once you have applied the Transfer to the Air Freshener Blank, allow the Transfer and Blank to completely cool to room temperature before you attempt to remove the transfer paper film that covers the transfer design. Once cooled, carefully start peeling the paper film back at one of the corners. The film will sometimes come off with a bit of pressure, rather than quickly releasing from the design. CAREFULLY pull the transfer paper film back from the design.

Step 7: Poke a hole and attach an elastic cord for hanging, and you're all done. These package nicely in Resealable Cello Bags with a cute sticker for resale!

If there is ever a fun Candle or Bath & Body product that you would like seen made, we would love to hear from you! Please send your requests to info@candlesupply.com.

Happy Candle & Soap Making!

-Elya

 

Fresh & Clean Carpet Refresher!

~Fresh & Clean Carpet Refresher~


You'll be surprised to find
that refreshing your carpet can be as easy as 1-2-3!

Materials you will need:

-7oz White Shaker Bottles

- .5oz Fragrance Oil

- 3 cups Baking Soda

-Small mixing bowl

-Fork or whisk 

 Step 1 ~

Combine Fragrance Oil (I used Lavender Lullaby & Rosemary Mint BNL) & Baking Soda in a small mixing bowl. Mix thoroughly using a fork or whisk

Step 2 ~

Using a spoon, carefully scoop the mixture into the shaker bottles. The shaker bottles are 1.75" wide and 5.25" tall. These bottles easily hold up to 7oz (be weight) of powder.

Step 3 ~ 

Apply powder liberally to carpets. Allow powder to set for 1-2 hours. 

*Note: For even better results, allow powder to set overnight. 

Step 4 ~

Vacuum thoroughly. You may want to make an additional pass with the vacuum, to make sure that all powder has been removed from the carpet. 

There are endless fragrance variations, for just about any occasion. Here are just a few for examples from our fragrance line:

Summertime Bliss (Great for a pick-me up during those dog days of summer)

-.25oz Lemon Pucker  & .25oz Fresh Squeezed Oranges

-.5oz Fruit Salad

-.5oz Apple Flower (BBW Type)

-.5oz Pomegranate Lemonade 

-.5oz Ocean Mist

-.5oz Country Clothesline

Minty Madness (Soothing for headaches)

-.25oz Peppermint & .25oz Rosemary Mint BNL

-.5oz Frost Bite

Woods/Outdoors (Ideal for any nature lover)

-.25oz Cedar Wood &  .25oz Juniper Breeze Type

-.25oz Patchouli & .25oz Lavender 

-.25oz Patchouli & .25oz Vanilla Velvet

-.25oz Sandalwood & .25oz Vanilla Extract 

-.25oz Birch Bark & .25oz Leather

Springtime/Floral (Perfect for the exciting time of spring!)

-.5oz Lavender

-.5oz Persian Lilac

-.5oz Pink Sandalwood

-.5oz Juniper Breeze Type

-.5oz Mulberry

Christmas/Holidays (wonderful for ringing in that Christmas Joy)

.25oz Pine Plantation & .25oz Cedar Wood

-.5oz Spiced Cranberry

-.5oz Christmas/Country Spice

-.5oz A Northwoods Christmas
-.5oz Candy Cane

Herbal

30 drops of Tea Tree Essential Oil 

.5oz Purely Herbal

.5oz Hello Hydration (Herbal Essences Type)

If there is ever a fun Candle or Bath & Body product that you would like seen made, we would love to hear from you! Please send your requests to info@candlesupply.com.

Happy Candle & Soap Making!

-Elya

Spring Votive Bouquet!

~Spring Votive Bouquet~

With Spring right around the corner, it's all about FLOWERS!

Votive bouquets are a fun, delicate project to take on for the season. 

Color them to match certain decor, fragrance them for a special occasion, or leave them unscented to use specifically as a beautiful decoration piece. 

Materials you will need:

-Votive Wax (I used the Feather Palm Wax)

-Candle Dye (I used the Liquid Candle Dyes) 

-Candle Wicks (I used CD-3 wicks)

-15hr. Votive Candle Molds

-AromaMagic Wands

-3x5 Clear Cello Bags

-Twist Ties ( I used the Gold)

-20mm B, 10mm N, 3mm H Wick Tabs (These fit the AromaMagic Wands perfectly)

-Green Silk Rose Leaves 

-Raffia Ribbon (Numerous colors to choose from)

-Hot Glue Gun

- Flower Vase

Step 1 - Depending on how big your flower vase is, and how full you'd like it to look, make as many votive candles as you wish, using the Votive Instructions on our web site. I used the Feather Blend Palm wax, as it is very pretty, without the need for any extra additives.

Step 2 - Once all your votives are made, now is the fun part... on the bottom of each votive, you will need to clear out any wax that is beneath the wick tab. This will create a smooth surface for another wick tab to be applied to, in the following steps. Using a butter knife of anything with a firm edge, is a useful tool for removing any wax that may be in the way. 

Step 3 - Using an AromaMagic Wand, and one wick tab, insert the AromaMagic Wand into the wick tab, through the top of the tab, as shown below. 

Step 4 - Using the hot glue gun, apply a small pea-size amount of glue to the bottom of the wick tab that the AromaMagic Wand has been inserted to. Apply this tab directly to the bottom of the wick tab from the Votive candle. Allow hot glue to cool for 5 minutes.

Step 5 - While waiting for the hot glue to fully cool on the wick tabs, use a scissors to make a single 1/2" cut up the middle of the very bottom edge of the 3x5" Clear Cello Bag. Prepare one cello bag for each votive you have. Once all cello bags are prepared, place the opposite end of the AromaMagic Wand into the Cello Bag, and through the 1/2" cut that you just created. 

Pull the Cello Bag all the way up until it has covered the votive candle. 

Step 6 - Using a Twist Tie, tie off the open end of the Cello Bag, around the top of the Votive Candle. 

Step 7 (final step) - To make for a cleaner look, use the hot glue gun again, to glue down the bottom edges of the Cello Bag. Now would be a good time to glue Silk Rose Leaves to the bottom of the cello bag as well, to add even more detail. 

Now that your votive candles are all covered and completed, 

go ahead and arrange them within your flower vase. The Silk Rose Leaves will add a sense of greenery to the arrangement, to give it even more of a floral look. 

Note: If you're wanting more firmer sticks, rather than the AromaMagic Wands, the sturdier Wooden Skewers in the BBQ section at your local grocery store will work wonderfully and will not bend, like the AromaMagic Wands will tend to do. 

If there is ever a fun Candle or Bath & Body product that you would like seen made, we would love to hear from you! Please send your requests to info@candlesupply.com.

Happy Candle & Soap Making!

-Elya

Goat's Milk Rose Soap!

~Goat's Milk Rose Soap~

(Melt & Pour)

The moisturizing nature of Goat's Milk soap 

helps keep skin smooth and nourished during the dry winter months; 

making it one of the most popular melt & pour soap bases on the market.

Material List:

~Goat's Milk Melt & Pour Soap Base

~Clear Melt & Pour Soap Base

~Fragrance Oil (must be skin safe)

~Round Soap Mold (4 cavity) 
~Open Rose Mold Tray (9 cavity)

~FD&C Liquid Bath & Body Dye

~4x6" Resealable Cello Bags

Step 1: Cut the Goat's Milk Soap Base into 1inch cubes, following the score lines. Using a microwave safe cup, melt the base in 30 second intervals until the base is completely melted. This usually takes right around 2 minutes for 2 cups of base.  

Step 2: Color the soap base with Pink FD&C Liquid Bath & Body Dye. Add as many drops as you'd like, to achieve the shade of color you desire. Mix well! Fill the rose molds as soon as the base is mixed and fully colored. 

Step 3: Allow the roses to cool within the mold until they are completely solidified at room temperature.

Step 4: Repeat step 1 with the Clear soap base. Using the Round soap molds, set one rose into the center of each round mold, face down. Slowly pour the clear base, over each rose.

Step 5 (final step): Allow bars to fully harden are room temp. Allowing them to sit for at least 2 hours is ideal. Release the bars from the molds and they are ready to package!

*These bars fit nicely in a 4x6" resealable Cello Bag*

If there is ever a fun Candle or Bath & Body product that you would like seen made, we would love to hear from you!
Please send your requests to info@candlesupply.com.

Happy Candle & Soap Making!
-Elya

~DIY Creamy SILK Hand Soap!~

~DIY SILK Hand Soap~

Learn how to make your very own creamy SILK hand soap

with our easy step-by-step tutorial!

Materials you will need:

-Anti-Bacterial Hand Soap Base
-Mica Powder Colorant (we have several shades to choose from)
-Fragrance Oil (must be skin safe!)
-8oz Clear Bullet Bottles
-8oz White Pump Caps 
-Pinch, Dash & Smidgen Measuring Spoons



Step 1) Add 1/2 oz fragrance oil to Soap Base. 
*Note: if you add too much fragrance oil to the base, the base will thin out and be more water-like, rather than gel form. Be careful!

Once you add the fragrance and mix well, the base will then appear cloudy. This is caused by tiny bubbles within the base. As you can see, base without fragrance (above) vs. base with fragrance (below). Don't worry, it will turn back to clear once it has settled. :)

Step 2) Measure out base+ fragrance mixture.
If you are planning to make the entire batch just one color, this will save yourself some time. If you are wanting to make a few different colors, there are some things you will want to know. 

(1) gallon of base weighs 8.5lbs.

(1) 8oz Bullet Bottle will hold exactly 8.5oz of base.

(1) gallon of base will make exactly (16) 8oz Bullet Bottles.

Step 3) Add Mica Powder Colorant.
We have a variety of colors to choose from on our Mica Powder line. A few examples can be seen below. I made a few different colors with this batch. I used exactly (1) "Dash" measurement of Mica Powder for 17oz of base. I used this amount for each color and it worked well. 

Pearl Pink Mica Powder in a "Dash" measuring spoon

Pearl White Mica

Pearl Yellow Mica

Pearl Green Mica

Pearl Blue Mica

Step 4) Pour colored base into 8oz Bullet Bottles.
Using a funnel is super handy! Fill the bottles only to the point where the bottle starts curving up to the neck, like in the example pictured below.

Step 5) (Final Step!) Cut 3/4"-1" off the end of the Pump Cap tube & secure onto the bottles.
You'll notice that the tubes connected to the pump caps are just a bit too long for a perfect fit onto the 8oz bullet bottles. Cutting 3/4" - 1" off the end of the tube at an angle helps to ensure a perfect fit. Example below of where to cut. 

All Done!

These anti-bacterial silky hand soaps make wonderful gifts year-round!

If there is a product that you would like to see a blog about, 
please send us an email to info@candlesupply.com. We'd love to hear from you!


Happy Candle & Soap making!
~Elya